|
EZRoute2000 |
|
Printed circuit design studio for Hobbyists, Students, OEM’s |
|
If you’re looking for an easy to understand, supported and very capable pcb program for single sided, double sided or multi layers EZRoute2000 is your answer.
Request your demo from: wrj60@telus.net (Note not all browsers are setup to open your mailer please copy wrj60@telus.net then paste and email to me.)
EZRoute2000 consists of integrated schematic and printed circuit layout editors. 1. Symbol and footprint editors allowing you to create or modify existing items in a database of over 20,000 symbols and hundreds of footprints. 2. Use of imperial or metric in the same layout gives greater design flexibility. 3. Schematics can be drawn on A,B,C,D,E or custom sheet formats and can have up to 32 pages with hierarchy drawing capability. 4. Print or plot to any installed device and generate Gerber RS274X photo plots. 5. Excellon drill file creation. 6. Check the plot files with the built-in photo plot viewer. 7. PC Board layouts can be as large as 32” x 32”. Traces can be .001” - .255” or in metric in the same layout. 8. Multiple masks are available allowing work on component or solder layers, inner layers with ground and power planes for multi layer boards. Use copper, silk, solder mask, paste, assembly, schedule, Drill Drawing and Sketch masks. 9. Cursor position is shown by x,y location and can be set to 0,0 for on-screen measurements by pressing the period. 10. Colors for screen background, traces and text can be changed by using internal Windows color chart. All this and more for only $199.95 US
|
|
Available from: Specific Instruments Ltd 22869 125A Ave Maple Ridge, BC V2X 0N3 Canada
|
|
NOTICE how much of the screen is available for layout use. Area not lost as in other programs using screen to display components etc. EZRoute2000 uses drop boxes for this which disappear after use. |
|
Use of HOT KEYS speeds work |
|
Footprints are available in many Libraries. Easily create or modify standard footprints. |
|
Up to 1,000 pad descriptions are available. Change pad size, shape, layer, have drill hole or solid. Pads are displayed when selected. |
|
Change program properties, layer masks/layout grid/cursor as required |
|
Press M to get the Properties box Select step Grid from the chart
Or enter the grid spacing as required. |
|
Change Board Properties allows you to change: Layers, Width, Length and grids |
|
Select Inches, Mils or Millameters Use both in the same layout if needed |
|
.001” to 1.0” or metric equiv. |
|
Using EZRoute Std Pro or CC?
Purchase using: PayPal Delivery by email.
Backup cd and manual by post. +$7.50 post
Make 1 or many pcb’s
see
|
|
Using EZRoute Std, Pro or Circuit Creator? You will be pleased with the changes in EZRoute2000. |
|
Make one layout or copy and paste to make many.
I leave .025” between each board, eliminates waste and cutting time. (I use a shear) |
|
Make your own boards? If you use toner transfer, you are able to print pads with holes.
Having a gerber plot made for you? Remember, photo plotters flash pads so no drill hole shows. To have a drill hole showing, make your pad by using a 360 degree arc. Change trace width and spacing to give the correct size hole. Photo plotters draw arcs. |
|
Do surface mount on multi layer boards |
|
Load the latest Skype and I can show you in real time the How-To’s and Why’s of EZRoute2000. See my screen while I explain, or I can view your screen. Skype bjenkins.8 NOTE I’m on the West Coast of Canada, (PST) and will find a good time to contact you. |
|
This board area is 6” X 3”
Can be up to 32” X 32” |
|
Send your boards out for v-scoring |
|
Blue is solder side copper, red lines are component side v-score lines for board mfr’s use. Using v-score you are able to move board layouts much closer. |